Pureculaser ZPV1

Introduction

• The Pureculaser ZPV1 water treatment system is a compact, versatile device designed for applications with water flow rates and volumes from 6-120 m³.
• The system fully integrates AOP technology for effective water disinfection and purification.
• For detailed information on AOP technology, please visit: https://filterfinevn.com/cap-nhat-ngay-xu-huong-cong-nghe-aop-the-he-moi-cua-kitz-sct/

Typical Specifications: The ZPV1 series includes two main models, ZPV1-40 and ZPV1-H40, with the following specific technical specifications:

• Ozone generation: Model ZPV1-40: 1.5 g/h and Model ZPV1-H40: 2.0 g/h.
• Water circulation flow rate: 50 – 150 L/min (Maximum 200 L/min)
• Power consumption: 880W (plus 11W for the automatic drain)
• Fluid temperature: Operates between 0°C and 50°C.
• Dimensions (Width x Depth x Height): 491 x 460 x approximately 580 mm
  Composition: Includes the main unit, air compressor (packaged separately), and automatic drain trap.

Benefits

• Cost savings: Reduced frequency of filter replacement and consumables by preventing the formation of biofilm (slime) in the system.
• Increased productivity: Reduced downtime for cleaning tanks and pipes, and improved product quality by eliminating bacterial stains.
• Safe and Sustainable: An environmentally friendly product that supports the Sustainable Development Goals (SDGs) by not generating secondary toxic substances.

Typical Applications:

• Bathtubs and Small Swimming Pools: Suitable for bathtubs with volumes from 2 to 12 m³ or small swimming pools from 20 to 120 m³.
• Agriculture (Hydroponics): Used to purify nutrient solutions for tanks with volumes from 8 to 11 m³. Model ZPV1-H40 has been proven to maintain low levels of bacteria and coliforms in hydroponic farms.
• Pure Water Recycling: Used in ultrapure water recirculation systems with processing capacities up to 60-100 m³.
• Industrial Washing Processes: Particularly effective in electroplating lines (gold, copper) where strict TOC and bacterial control are required to ensure product surface quality.