ProcessGard® PP Filters

ProcessGard® PES Filters

*Materials:
– Membrane, supports, core, sleeve: Polypropylene
– O-rings (AS568-222): EPDM, fluoroelastomer, E-FKM (encapsulated fluoroelastomer)
*Dimensions (nominal):
– Length: 263 mm (10.35”)
– Diameter: 70 mm (2.75″)
* Operating conditions:
– Maximum forward differential pressure: 0.4 MPa (4.0 bar, 58 psi) @ 20°C (68°F)
– Maximum reverse differential pressure: 0.25 MPa (2.5 bar, 29 psi) @ 20°C (68°F)
– Maximum operating temperature: 80°C (176°F)
*Retention rating: 0.3, 0.6, 1, 3, 5, 7, 10, 20, 30 and 40 μm
Note: ProcessGard® PP cartridge filters can be sterilized by autoclaving up to 25 cycles at 125°C (257°F) or sterilized by steam-in-place up to 5 cycles at 135°C (275°F) for 30 minutes at less than 0.3 bar differential pressure.