PROMOTION PROGRAM, CUSTOMER GRATEFULNESS

Tuesday September 20th, 2022
  -  
0 lượt xem

Celebrating the 10th anniversary of the establishment of Filterfine, we Filterfine- Schussler offers our customers a special promotion program to thank our customers for their trust and companionship during the past time.

The product experience trial program is completely free.

  1. Shrink fit chuck products, and Shrink fit machine.

Currently, in the mold processing industry, almost Shrink fit chuck 3D machining is indispensable in every production workshop.

The advantages and convenience of Shrink fit chuck are many, but when changing cutting tools, the story is different, especially when you have to change cutting tools many times.

Popular heaters now take 2-3 minutes to heat up and change cutting tools, not to mention cooling time.

But with Schussler’s µ-Connect Shrink fit machine, this process is greatly shortened, thanks to the following advantages:

  • Compact design 390 x 310 x 640 mm, easy to move between locations in the factory, easy to operate and use.
  • Very fast heating time with 3-5s for each cutting tools change (no additional cooling time).
  • Knife clamp diameter Ф3-16 mm.
  • The converter system is compatible with all current clamping standards BT30, BT40, BT50 or HSK series.

With the same advantages as on the µ-Connect machine, the application is suitable for all tool change needs, saving a lot of time.

2. For Shrink fit chuck, each time the tool is changed, the hot clamp expands, and contracts continuously after 1 time, causing the Holder chuck to be wrong, leading to failure.

Like the popular Shrink fit chuck lines on the market, the average lifespan of each heat clamp is 2-3 years

With Schussler we bring Shrink fit chuck solution with the following advantages:

  • Products made 100% in Germany, with special steel material technology, quenched and surface treated, helping Holder chuck have a long service life of 3-5 years.
  • The surface of the bulb is specially treated to limit corrosion and environmental impacts.
  • Dynamically balanced clamp ≤1gmm, and run-out ≤ 3 µm.
  • Good accuracy and run-out help increase the life of the cutting tool by 10%.

As the advantages and outstanding technology come from the world’s number 1 mechanical background in Germany, customers can fully experience the machine and Holder chuck at their factory and completely free of charge.

The quantity of Shrink fit chuck and Shrink fit machine is limited. Please contact us quickly to experience and use it as soon as possible according to the information below.

Nguyen Van Thanh (Mr.) – Sales Engineer – HN

Mobile/Zalo: +84(0) 969900677

Email: saleshn4@filterfinevn.com