Đang thực hiện
HN: 0986 592 820 HCM: 0961 152 844

BNM ENM FNM PNM Nylon 6,6 Cartridge Filters

Status: Out of stock
Price: Contact us
  • Product information:
BNM ENM FNM PNM Nylon 6,6 Cartridge Filters
Maximum Operating Parameters
Differential Pressure
• Forward (in water) 50 psid (3.4 bard) 20 °C (68 °F)
• Reverse 40 psid (2.7 bard) at 20 °C (68 °F)
Operating Temperature 82 °C (180 °F) at 10 psid(0.69 bard) in water
Recommended Changeout Pressure 35 psid (2.4 bard)
Filtered Hot Water 90 °C (194 °F), 30 minutes, multiple cycles, max 3 psid forward flow
Autoclave 121 °C (250 °F), 30 min, multiple cycles
In-line Steam 135 °C (275 °F), 30 min, multiple cycles
For all elevated temperature procedures above, a stainless steel support ring is required.
Construction Materials
Filtration Media Nylon 6,6 Membrane
Media Support Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Polypropylene
Sealing Method Thermal Bonding
O-rings Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton (or FKM)
Length 5 to 40 in. (12.7 to 101.6 cm) nominal
Outside Diameter 2.75 in. (7.0 cm) nominal
Filtration Area 7.0 ft2 (0.65 m2) per 10 in. length
  • ENM Nylon 6,6 Cartridge Filters
ENM Filter Cartridges are designed to meet the special needsof the electronics and high purity chemical industries. Able toremove particles below the rated pore size of the membrane,these cartridges are cost effective and exhibit superior retention.They are often used for DI water, photoresists, developers, andother compatible chemicals. Each cartridge module is pulse powerflushed until the rinse effluent reaches 18+ megohm‑cm, and lessthan 3 ppb TOC. Each cartridge module is also individually testedfor integrity. Our design criteria and special procedures allow usto provide the highest quality electronics grade cartridges
  • PNM Nylon 6,6 Cartridge Filters
PNM Membrane Filter Cartridges are sterilizing grade nyloncartridges. The nylon membrane used in these cartridges isoptimized for retention. Nylon cartridges see broad service insterile fill applications in SVPs and as bioburden managementfilters in LVPs. Media and service liquid filtration are other commonapplications for this cartridge. Nylon is particularly suited for thefiltration of solvents because of its broad compatibility and lowlevel of extractables.
  • BNM Nylon 6,6 Cartridge Filters
Biopharmaceutical grade Nylon 6,6 membrane filter cartridgesare made using Nylon 6,6 membrane. The Nylon membrane usedin these cartridges is optimized for retention. Nylon cartridges seebroad service in bioburden management for filling operations aswell as for buffers, feedstocks, purified water, WFI, and other media.BNM cartridges are also used for the filtration of solvents becauseof Nylon’s broad compatibility and low level of extractables.
  • FNM Nylon 6,6 Cartridge Filters
FNM Membrane Filter Cartridges are designed to comply with allFDA requirements for the food industry. Nylon is particularly wellsuited for water and syrup filtration. Nylon is not recommendedfor filtering fermented beverages or liquids with high proteincontent. Contact Critical Process Filtration to discuss using thiscartridge as a low cost alternative in compressed gas filtration.These cartridges have been rinsed with high purity water toensure that manufacturing debris will not contaminate yourproduct. This washing also removes extractables that may affectthe taste of the product.
Office in Hung Yen :
Address : THU 085, Thuy Nguyen, Ecopark, Xuan Qua, Van Giang, Hung Yen, Viet Nam
Hotline HN: (+84)986 592 820                                   
Tel/Fax: +84 24 3577 3045 - 3222 2380
Email : info@filterfinevn.com
  Office in Tp.Ho Chi Minh :
Address : 1th Floorr,Sabay Office Building, 11A Hong Ha, Ward 2, District. Tan Binh, HCM city, Vietnam
Hotline HCM : (+84) 961 152 844                
Tel/Fax: +84 28 3636 7332 - 28 3636 7335 
Email : info@filterfinevn.com
Design by Web123.vn™